It was very easy to install and looked well made. But after I installed it, right out of the packaging, I was wondering to myself if I should have tightened the "cartridge keeper" on the unit before installing it. There were some videos on Youtube that showed a guy cinching down the cartridge keeper "nut" before installing it. I don't remember if the video I saw was for your mini converter or not. So since I didn't tighten it, should I expect that nut to come loose and fall into my tailpipe?
There is no need to tighten the “cartridge keeper” nut before installation. During manufacturing, we use a machine to tighten it securely to the proper torque, so it is already firmly secured when you receive the product. You do not need to tighten it again before installation, and you should not expect the nut to come loose or fall into the exhaust system.
Se ven muy bien, incluso algunos amigos me preguntaron dónde las conseguí.
It is adorable, easy to install, and beautiful. I am thrilled with the purchase. I highly recommend the product!
Very pleased with the quality and performance. Would buy again.
Looks fantastic on my car and holds up well under pressure.
It fits perfectly and enhances the look of my car's engine bay.
Didn’t work
Perfect all tanks ok
What can I say? This is the second time I have purchased. I would and have highly recommended this O2 sensor.
Seems to work pretty good 👍🏼, just be sure to verify if you need 180° or 90°
Cleared codes and works great on 2 vehicles. Would recommend to anyone having problem clearing codes for cat efficiency
Very cool design, too bad no one’s going to see it under there. Works like a charm.
Installed on a friend's 2016 Nissan Sentra. Product did work, and got her inspection passed however the CEL came back a week later. I don't think it's due to the Product as her catalytic converter may have been contaminated with coolant inturn may have compromised the mini-cat catalyst. Haven't verified new codes at this time, just guessing.
Worked on a 99 miata. A bit of tweaking to get it to fit. But the CEL has not come back on after clearing.
My check engine light had been on for months. I replaced the catalytic converter and both oxygen sensors, but nothing worked and the light stayed on. After installing this part and driving about 250 km, the check engine light finally turned off on its own. Huge relief. It really works.
200 miles in Check engine light still off. It passed the Emissions test with no issues.Delivery and packaging was as expected Will recommend to others.
Installed these on my 260,000 mile GMC Sierra with a 6.0, constant engine light for catalyst efficiency low. Put these in on both rear O2 sensors and solved my issue. Better than a 1600 dollar replacement CAT on an old work truck! Thanks.
Hi,
I was anxious to get my 90°O2 Sensor Spacer Mini Catalizador, and opened it Immediately. I was impressed on the
spot. It was beautiful. It appeared to be a High Quality Part. It was beautifully designed, machined, and finished. It
was solid, "chunky", and shiney. I was expecting something less refined, but this was straight out nice. I felt that I
had made a good decision to purchase this part. I couldn't wait to install it, and test it out.
Unfortunately, as we tried to remove th O2 Sensor, from the Head Pipe on my vehicle, we ran into resistance. We
worked it back and forth carefully, to try to ease the Sensor out, but ultimately, the bung was stripped of it's threads.
Sadly, we were forced to go a different route, since the pipe had to be replaced, and I wasn't able to use your part.
Thank You, for your attentive, and polite customer service, and your patience with me.
I would recommend this part and your company to anyone, on the fence about purchasing your products.
Thank You Again,
Got 1 installed so far so good 👍
Worked exactly as advertised and cleared my error code for Nissan Xterra due to not having a Catalytic Converter.
Originally my orders was lost in the mail by usps. Luckily these guys replaced it quickly. Great customer service
We put in rear 02 sender cancel the code drove 100 miles got car inspected